Intensive cleaner (choose your content)

Osmo Intensive cleaner (choose your content),

Product description;
Ideal for intensive cleaning of oiled and waxed surfaces. For surface treatment with Osmo finishes.

Usage;
Ideal as an alternative to sanding on all oil and wax treated wooden surfaces such as wooden floors, furniture, but also plastics, stainless steel and other waterproof surfaces.

Preparation Remove loose dirt from the surface with a broom or hand brush. Dilute the concentrate 1:10 to 1:20 with water. First test the product on the surface.

apply;
the diluted cleaner on the contaminated surface (possibly with a green pad) with a mop. Remove dirt and then rinse with clear water. Remove dirt with Osmo mop or lint-free cotton cloth. After drying, treat oiled or waxed surfaces with the correct Osmo finish, for example Osmo hardwax oil or Maintenance oil.

note;
Do not use undiluted. May cause discoloration or surface change on unfamiliar substrates. Woods rich in content (especially oak) darken after contact with undiluted intensive cleaner. Even if diluted, at least try it on an inconspicuous area. Before bowl drying the concentrate. Not suitable for daily maintenance.

NB:
Contains disodium metasilicate. Causes skin irritation. Causes serious eye irritation. Keep out of the reach of children. Read the label before using. Wear protective gloves/eye protection. In contact with the skin; wash with plenty of water. On contact with the eyes; rinse gently with water for several minutes; remove contact lenses, continue rinsing if possible. When seeking medical advice, have container or label available. Reacts with acids with evolution of heat. Chance of splashes!. The usual precautions when handling chemicals must be observed.

Consumption:
1 liter is sufficient for about 30-100m2 with one layer, depending on the degree of pollution.